Kendi yapay yildirmimizi uretmek

Arkadaslar bugun sizlere kendi yapay yildirimimizi nasil uretttigmizi anlaticagim.
Bu ilsem bize tesla coil (Tesla bobini) lazim
Tesla bobini yapimi
Codex upayi
Not:bu yazi turkiyede sadece woltran.com farki ile yayinamaktadir.
--------------------------------------------------------------

500,000 Volt Tesla -bobini (1995)

This Tesla coil was designed to run on a 900 Watt neon transformer. Unfortunately, all I had was a 240 Watt neon transformer, which was still enough to generate 175,000 Volts with streamers up to 18" long. It cost about $50 to build (not including the transformer).
Fundamentals of the Tesla Coil
---Baglanti semasi

A Tesla coil is a high voltage transformer with an air core. The primary and secondary coils each have inductance and capacitance so they function as an LC circuit with its own resonant frequency. The primary capacitance comes from a capacitor that discharges across the spark gap when the voltage is high enough. The secondary capacitance comes from the coil itself and the sphere or toroid at the top. When both circuits have the same resonance frequency, the oscillations efficiently contribute to the induced voltage.

--------------------------------------------------------------------------------

This was my first Tesla coil built in 1994. It didn’t work very well. The picture on the right shows a rotary spark gap that was used.

Here is my second Tesla coil built some time around 1994. The secondary coil is 3.5" diameter × 14" tall and has 996 turns. The original design was closely modelled after Gordon McComb’s book, Gadgeteer’s Goldmine. It never worked very well, but I think it will work quite nicely now that it has been modified. The left picture shows the original coil and the right picture shows the new modified design.

This was my third Tesla coil built in 1995. This is the same coil as shown at the top of this page. The design was based on John H. Couture’s Tesla Coil Design Manual (1992). The secondary coil is 5" diameter × 20" tall and has 508 turns. It is interwoven with fishing line and coated with enamel to improve the insulation between turns.

This miniature Tesla coil was also built some time around 1995. The secondary coil is 1.625" diameter × 6.375" tall and has 1080 turns.

-----------Fomuller hesaplamlar------------------------------
Useful Formulas
There are plenty of other great web sites for designing Tesla coils so I will just summarize some basic formulas here:
Notation: these formulas use the following notation:

------------
saygilarimla codex upayi.Biz yaptik bir tane cok guzel calsiyor.İiyi sanslar.

Lutfen okuyun
Bu bobini bir kez calsitirdiktan sonra fişsş cekince hemen bobini ellemeyin.Cunku fisi cekseniz dahi bobibnin uzerinde 1000-2000v arasi bir gelrim hayla durur.
2-)Bobin calisirken asla elinizi bobine degdirmeyin
3-)Ilk baslarda calistiginda bu bobinden korkabilirsiniz.Ama mereka etmeyin yakinda bu bobinin sesine alsirsiniz.
4-)Bobin calsirken havayi hafifte olsa iyonize ettigi icin ortalikta havada bir degisk koku olur merak etmeyin.Bobiniz yainmiyor.Yangin cikmiyor.
5-)Bobini calsitirdiginiz ortamda hicbir radyo cep telefonu televizyon bulundurmayin.Bu cihazlari bozar.
Hatta bazi tesla bobinleri havada sizden 100 lerce metre yukseklikte ucan ucaklari bile manyetik alaniyla dusurdugu Amerikan FBI ve CIA tarafindan dogrulanip kabul edilmistir.
6-)Bobin calsirken saki,n uzerinizde metal bulundurmayin.Yildirim icinizden gecerse korkmayin.Bu oldurmuyor.oyle bir ilginc alet.Ama calisirken uzerinizde metal olursa sizi oldurme ihtimali var.
7-)Bobin calsirken asla ciplak ayakla durmayin ayaginizda terlik veya ayakkkabi olsun (Yani bir yalitkan olsun)
SUanda bu kadar bu bilgilere en kisa surede yenileri eklencektir.

upayi

ultra@slan

upayi

cufucuf

upayi